Texas Security Gates - traffic controllers, gate openers, access control, commercial gate openers, residential gate openers, traffic control products, tiger teeth

Elite CSW 200 Swing 1/2 HP

~~$1,550.00~~ $1,499.00

Click to enlarge

Elite CSW-200-UL High Traffic Commercial Swing Gate Operator

FEATURES AND SPECIFICATIONS MODULAR BOARD: Uses LEDs to indicate all input and output functions of the gate operator. ERD SENSOR: If the gate hits a vehicle while closing, it reopens. If it hits a vehicle while opening, it stops, reverves 4 to 6 inches, and stops again. DIGITAL MOTOR PROTECTIONS: Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverves direction for several inches, a nd stops. ELECTRONIC INPUTS: Radio receiver, key switch, safety loop, center loop, telephone entry system, computer input, fire dept. key switch and 3 push-button stations. TIMER: Adjustable timer can be set from 0 to 60 seconds. POWER INPUT ON/OFF SWITCH: Controls power input to the board with convenient switch. MAGNETIC LOCK: With Omni Option board, magnetic lock system is incorporated, allowing you to easily add the "MG1300" electromagnetic locking system to the gate. INTELLIGENT PRIMARY/SECONDARY: Precise, synchronized movement and communication between two gate operators using three wire res-485 bi-directional technology. GATE TRAVELING TIME: Adjusted by a precision mechanical device an electrical limit switch system. SOFT STOP: Gate travels through the cycle at normal speed and comes to a stop slowly for a more accurate gate cycle. INTERGATED LOOP DETECTORS: Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and safety loop. MOTOR DRIVE: Solid state electronic motor drive system is incorporated into board. BUGLAR ALARM: With OMNI Option board, interfaces with exsisting home alarm or alarm output. 3 PUSH BUTTON CONTROL: On board gate operator control for close, stop, and open.

ELECTRICAL SPECIFICATIONS

120 VAC Power Built-in 120 VAC power receptacle (NEMA 5-15)

Alarm If the gate hits an object twice while opening or closing, the system will shut down and an alarm will sound for five minutes

Alternate Outputs With Omni Option board, three push button command control, burglar alarm input and output

Burglar Alarm With Omni Option board, interfaces with existing home alarm or alarm output

Digital Motor Protection Entrapment sensor shuts off the motor after it reaches the stall amp for 3 seconds, reverses direction for several inches and stops.

Electronic Inputs Radio receiver, key switch, hold open loop, center loop, telephone entry system, computer input, fire department key switch, and 3-push-button station

ERD Sensor If the gate hits a vehicle while closing, it re-opens. If it hits a vehicle wile opening, it stops, reverses 4 to 6 inches, and stops again

Gate Traveling Time Adjusted by a precision mechanical device and electrical limit switch system

Integrated Loop Detectors Easy to install, modular, plug in loop detector inputs for exit loop, center loop, and hold open loop

Intelligent Master/Slave Precise, synchronized movement and communication between two gate operators using three wire RS-485 bi-directional technology

Magnetic Lock With Omni Option board, magnetic lock system is incorporated, allowing easy addition of the MG1300 locking system to the gate

Modular Board Uses LEDs to indicate all input and output functions of the gate operator

Motor Drive Solid state electronic motor drive system is incorporated into the board

Power Input Controls power input to the board with convenient switch

Power Management Board includes electronic power management with over current shutdown and automatic recovery

Soft Stop Gate travels through the cycle at normal speed and comes to a stop slowly for more accurate gate cycle. Equipped with integrated time delay for long mechanical life expectancy

Spike Suppressors Fast response time (50 nanoseconds) when subject to an impulse surge (lightning strike) up to 100 amps

Three Push Button Control On board gate operator control for close, stop and open

Timer Adjustable timer can be set from 0-60 seconds

MECHANICAL SPECIFICATIONS

Approval		UL and ETL listed to the latest UL325 and UL991 specifications.
Chassis		Constructed with .25 inch sanded, welded, and gold zinc plated sheet metal.
Cover		High density polyethylene plastic and stainless steel for excellent heat and corrosion resistance.
Cycles		75 cycles per hour with a 600 pound gate.
Dimensions		Length = 20.5in x Width = 15in x Height 28in.
Emergency Release		The gate is easily disconnected by turning the release handle. the best option is our DC-1000CSW.
Finish		All metal parts are gold zinc plated for rust proof protection.

This product was added to our catalog on Friday 25 February, 2005.